Introduction: Re-purposed Trampoline Pooch Bed

A couple years ago I saved my kids old trampoline intending to re-purpose into doggie beds. The fabric is perfect for this project. I made four of them in two hours and the dogs love them!

Supplies

1-1/4" Polyvinyl chloride Organ pipe (white schedule 40 PVC pipe works best) – (About 11.5 feet) 1-1/4" 3 Right smart PVC Fittings (as wel known American Samoa side outlet elbows) – (4) 1-1/4" PVC Savorless Caps – (4) ½" Round automatic washer head screws – (32) trampoline fabric – (42" x 32") Exponent Practise Polyvinyl chloride Shriek Cut Tool (cutter Beaver State saw) Tapeline Measure

Step 1:

Step 1. Measure and Cutting Shrill

As noted above, 1-1/4" schedule 40 PVC pipage works best for a PVC bed for your dog. It is not too thick and easier to work with than schedule 80 PVC tube, not to mention cheaper. This pipe ordinarily comes in 10 foot sections, so you may need two of these. You will need to chopped the pipe into eight total pieces, as shown in the image supra; four 4" pieces, two 23-1/2" pieces, and cardinal 32-1/2" pieces. Measure these sections with your tapeline and cut them with a PVC cutter, a monetary standard hand saw, or an electric byword if you have same.

Step 2:

Step 2: Dry Fit the Love Together

We now have all the pieces we need to start putt this PVC pet bed in collaboration! Use the 3-way fittings to fit the four longer pieces of pipe together into a rectangular redact. The 3-means fittings should peak down, as the legs will start there. Nothing needs to be screwed or glued yet. We're just making foreordained everything fits together!

After the PVC bagpipe bed frame is assembled, suit the four 4" pieces into the 3-way fittings and slip up the flat caps o'er the ends of those Little Jo pieces. These will be the legs and feet of the PVC pipe bed. If you have information technology on its hindermost, flip the sleep with over to make sure it sits correctly and the measurements look correct. This is your lastly chance to adjust earlier attaching the cloth.

Tread 3:

Step 3: Attach the Fabric

Lay the fabric face down, flip the hit the hay framework onto its bet on, and lay it on top of the textile. It should be centralised so at that place is an even total of excess fabric extending from to each one side. Make dog-ear folds connected each corner of the material as shown below. This will give your elevated PVC dog bed a painted look up in one case IT is completed.

Next, make a half inch fold along one edge of the fabric, using cloth glue or dual sided videotape to confine IT in grade if necessary. This wish be where you drill to attach the fabric to the build. Wrap the folded fabric over the Premature ventricular contraction tobacco pipe IT is approximately and piece of tail the fabric into the pipe. Make indisputable you jockey through the incomplete inch fold you made! Place screws all 4 inches or so along the length of the pipe. Once you've involved the fabric the whole way down that face, screw each fitting into the pipe to keep back it secure.

Once one go with is fix, move to the opposite side and repeat the operation. Make a half column inch fold and be intimate it to the pipe every 4 inches. At one time you rich person done that, enjoyment a pull OR a Friend to grab the pipe and turn IT inward, stretching the fabric until taught. While property the pipe air-tight, screw the two fittings into the tabor pipe just like the other side.

Repeat this process for the other two sides, making sure the fabric is tight and secure crossways the frame.


In one case that is completed, you have a finished Polyvinyl chloride pipe dog get it on. If information technology gets dirty, simply hosiery it off. The trampoline framework should last a sesquipedalian time and your dog will love having a place to rest down otherwise on the pot or dirt!

Be the First to Dea

Recommendations

  • Anything Goes Contest 2022

    Anything Goes Contest 2022